PGY-USB3.0 Protocol Decode Software Datasheet
USB 3.0 Electrical Validation and Protocol Decode Software offers electrical measurements compliance testing and protocol decoding as specified in USB 3.0 specification. PGY-USB 3.0 Electrical validation and Protocol decode software runs in Tektronix Oscilloscope provides electrical measurements and protocol decode at click of button. This allows engineers quickly check for USB 3.0 compliance and flexibility to debug the failure. In addition to this engineer can decode the command and response of USB 3.0 debug the communication. PGY-USB 3.0 takes advantage of digital channels of MSO and provides the decoding of USB 3.0 data lines.
The Detail View window gives a comprehensive detail of the signals being analyzed. It gives details of the bytes in each packet and the timestamp at which the packet is received. The waveform plot is linked with the packet being displayed on the grid. The plot contains various features like bus diagram , zoom, pan, representation of bits on the waveform and cursors.
Features
- The configuration panel enables the user to load the Tx and Rx signals
- The LFPS packets are displayed in tabular manner and gives details of their timing parameters
- Under the SuperSpeed selection, the transactions are packetized to USB3.0 packets and displayed
- On expanding each packet, details with respect to that packet are displayed
- The Protocol View displays the transactions on both the Tx and Rx. This helps in easy linking of transactions between Tx and Rx
- The Detail View window gives a comprehensive detail of the signals being analyzed
- It gives details of the bytes in each packet and the timestamp at which the packet is received
- The waveform plot is linked with the packet being displayed on the grid
- The plot contains various features like bus diagram , zoom, pan, representation of bits on the waveform and cursors