*SPI Electrical Validation and Protocol Decode Software ▼
Engineers, designing and testing SPI hardware and firmware, need to measure electrical parameters and monitor protocol of SPI interface to ensure inter-operability. Engineers, test and debug their designs with easy-to-use instruments such as oscilloscopes to capture the electrical signals but use time-consuming and error prone tools to make electrical measurements and protocol analysis. Often, they need a single tool or instrument to cross-examine the protocol layer and the PHY layer to debug the designs to reduce development and testing cycles.
The PGY-SPI Electrical measurements and Protocol Decode Software offers electrical measurements and protocol decoding for SPI bus. This software provides the flexibility to set reference levels for electrical measurement and customised limits makes it most versatile solution to meet different needs of characterising SPI Signals. Now design and test engineers can automatically make accurate and reliable electrical measurements and decode protocols in PGY-SPI software using data acquired by Tektronix DPO5000, TDS7000, DPO/DSA/MSO7000 oscilloscope series to reduce the development and test cycle.




-> Automated electrical measurements with customizable reference level of SPI electrical signal.
-> Automated measurements independent of speed of SPI Bus
-> Customizable measurement limit setup for pass/fail validation of electrical signal to enable measurements at different data speed.
-> Decodes SPI signals MOSI and MISO for easy understanding of protocol
-> Links the protocol content to the electrical signal in the oscilloscope for easy understanding of the electrical characteristics of the protocol
-> Overlays the protocol data on analog waveform in a waveform plot window
-> Zooms the selected SPI packet content in the decode table in the waveform plot waveform window for easy analysis of electrical characteristics of the I2C frame
-> Ability to view protocol decode data in hexadecimal, decimal, binary, octal, and ASCII formats
-> Ability to store the SPI protocol data in CSV and txt format
-> Utility features like zoom, undo, and fit screen for easy debugging while correlating the protocol data to the waveform
-> Report generation in html format
-> Supports wfm and isf file formats for offline analysis